fsb fsb-l fluoroplastic pump can transport temperature not higher than 90 ℃ direct connection type or not higher than 105 ℃ with bearing bracket type, with or without) fine soft particles or fibrous, corrosive or hygienic requirements Liquid, the equipment also has self-priming performance, the two series of pumps are widely used in food, beverage, medicine, sewage treatment, chemical, fine chemical and other industries. Stainless steel corrosion-resistant materials include 304, 316, and 316L for users to choose. In order to let everyone play the expected effect when using it, let's talk about the main details when using it.

During the operation of fsb fsb-l fluoroplastic pump, please pay attention to the following work:

Regularly observe and record whether the indication numbers of the pump's outlet pressure gauge, motor ammeter, voltmeter and bearing thermometer are normal. If any abnormality is found, the cause should be found out and eliminated in time.

Always use a listening stick to listen to the internal sound (the listening parts are mainly bearings, stuffing boxes, glands, all levels of pump chambers and seals of the direct-connected fsb fsb-l fluoroplastic pump), pay attention to whether there is friction or collision sound, and find that the sound is obvious. If there is any change or abnormal sound, it should be stopped immediately and disassembled for inspection.

Always check the lubrication of the bearing, and pay attention to the temperature rise of the bearing. Generally, it is stipulated that the bearing temperature cannot exceed 70T. If there is no thermometer installed, it can be touched by hand. Bearings lubricated with oil ring should pay attention to the working condition of the oil ring, whether the rotation of the oil ring is flexible, and whether the position is correct. For ball bearings lubricated with grease, it should be noted that the grease should not be overfilled, and the grease cup should not be tightened with force. If the large pump of the circulating oil supply system is used, you should always check whether the oil supply equipment (oil pump, oil tank, oil cooler, filter screen, etc.) is working normally and whether the oil return of the bearing is smooth. When the bearing is cooled with cooling water, attention should be paid to the cooling water flow and regular oil changes.

Regularly check the working condition of the stuffing box, whether the external parts are hot, whether the cooling water and sealing water supply system work: whether it is normal, whether the gland leaking is normal (generally 10~30 drops per minute are qualified).

Operators should operate in strict accordance with the regulations of each pump, and cannot change the operation mode at will without scientific basis and experiments. For large pumps, the axial displacement of the rotor of the pump should also be regularly checked.

fsb fsb-l fluoroplastic pump https://www.luolintec.com/Corrosion-resistant-pump