Bangzhou Machinery will share with you the technical overview of Slitting Line and Cut To Length Line. If you are interested, welcome to contact us.

The slitting line and cut to length line are equipment for longitudinally and horizontally cutting raw materials according to the actual needs of customers to prepare materials for subsequent forming processes. Among them, the material after slitting is generally used for continuous production. Such as: automatic stamping, rolling, secondary longitudinal, cross-shearing processing, etc., the material after cross-cutting is generally used for single forming processing. Such as: sheet metal stamping, bending, stretching and so on.

Since the slitting line generally retains the function of cutting and rewinding all raw materials, compared with the cut to length line, the simplification of the slitting line is relatively simple. The general width is below 800mm, the thickness is above 0.5mm and below 2mm, the plate strength σs<300MPa, the load-bearing is below 5 tons, and the production speed is around 40m/min. The general method of simplification is to replace auxiliary equipment such as hydraulic or pneumatic with manpower. And because the rolls of such materials are lighter, the production speed is slower and the rigidity of the frame is easy to ensure. And the installed capacity is low, and the occupied area is small, which is suitable for small batch production. However, with the increase of the plate width, the thickness of the material becomes thicker, the volume of the material is heavier, and the production speed is increased. In the design, various safety factors need to be greatly improved, and the purpose of simplifying the design cannot be achieved.

Compared with the simple design of the slitting line, the simplification of the cut to length line is obviously diversified. Not only the matching feeding system is changeable, but also the shearing plate and the subsequent stacking system are different and combined according to different needs. changeable. Therefore, the form cannot be unified at all, so understanding the internal parallel connection of various related equipment combinations is one of the keys to mastering the simple cut to length line configuration the fastest.

In fact, we can regard the entire cut to length line as an alternative ordinary stamping line. The essential difference between these two devices is that there are many materials in the punching line that do not need to be corrected, while the cut to length line needs to be corrected without exception. Even in many high-end occasions, the configuration of the straightening machine directly determines the value of the cut to length line. Based on this, we can regard the shearing mechanism itself as a punching machine, and the scissors as a mold, then the entire cut to length line can be disassembled into concepts similar to conventional stamping lines such as peripheral equipment, punching machines and molds, and product collection. It's easy to understand.

We Are Slitting line and Cut to Length Line Manufacturer

BANGZHOU Machinery is a slitting line and cut to length line manufacturer that specializes in the production of high quality machines. Our machines are used in a variety of industries, including the metal and aluminum sheet industry. We have a team of experienced engineers who are dedicated to create machines that are durable and easy to operate. We also have a team of customer service representatives who are available to answer any questions you may have about our products.